Photovoltaic and Wind Turbine: A Comparison as Building Integrated Renewable Energy in Indonesia

Authors

  • Susan Susan Universitas Ciputra
  • Dyah Kusuma Wardhani Universitas Ciputra

DOI:

https://doi.org/10.21512/humaniora.v11i1.6294

Keywords:

Building Integrated Photovoltaic (BIPV), Building Integrated Wind Turbine (BIWT), Building Integrated Renewable Energy (BIRE)

Abstract

The research aimed to comprehensively review the systems related to Building Integrated Photovoltaic (BIPV) and Building Integrated Wind Turbine (BIWT). The review purposed to observe the advantages and disadvantages of the application. Designers could use that comparison for consideration of choosing the most suitable Building Integrated Renewable Energy (BIRE) concept for projects. The research presented a literature review of BIRE systems, particularly on BIPV and BIWT systems. The critical analysis focused on some parameters related to their main energy source, type, influencing factor, efficiency, and boundary. The observation about BIPV would be divided into subgroups according to photovoltaic (PV) materials, modules, efficiency, performance’s boundaries, and the general rule of thumb of its installation. The research finds that the BIPV application has advantages in terms of the building’s application scale. It can be applied from small-scale to large-scale. Furthermore, the BIPV application does not need extra space and could directly replace the conventional building envelope materials. The issues of non-uniformity and heat transfer in BIPV can be solved by installing PV in folding-concept and placed an air gap with fins inside. On the other hand, BIWT also has an abundant energy source, but the application limits to windy areas (rural areas or urban areas in high elevation). Aside from those limitations, the BIWT application also has issues of structure, noise, and aesthetical value.

Dimensions

Plum Analytics

References

Abdel-Halim, M. A., Mahfouz, A. A., & Almarshoud, A. F. (2014). Enhancing the performance of wind-energy-driven double-fed induction generators. Journal of Engineering and Computer Sciences, 7(1), 23–41. https://doi.org/10.12816/0009556.

Alnaser, N. W., Flanagan, R., & Alnaser, W. E. (2009). A “comprehensive” model for accelerating the Building Integrated Photovoltaic (BIPV) / Wind Turbine (BIWT) construction projects in the Kingdom of Bahrain. The Open Construction and Building Technology Journal, 3(1), 1-11. doi: 10.2174/1874836800903010001.

Biyik, E., Araz, M., Hepbasli, A., Shahrestani, M., Yao, R., Shao, L., Essah, E., Oliveira, A. C., del Caño, T., Rico, E., Lechón, J. L., Andrade, L., Mendes, A., & Atlı, Y. B. (2017). A key review of building integrated photovoltaic (BIPV) systems. Engineering Science and Technology, An International Journal, 20(3), 833–858. https://doi.org/10.1016/j.jestch.2017.01.009.

Bobrova, D. (2015). Building-integrated wind turbines in the aspect of architectural shaping. Procedia Engineering, 117(1), 404–410. https://doi.org/10.1016/j.proeng.2015.08.185.

Bonifacius, N. (2018). Komparasi biaya rutin antara BIPV, genset, dan PLN setara 900VA. Mintakat, Jurnal Arsitektur, 19(2), 77-84.

Calise, F., Cappiello, F. L., Dentice d’Accadia, M., & Vicidomini, M. (2020). Dynamic simulation, energy, and economic comparison between BIPV and BIPVT collectors coupled with micro-wind turbines. Energy, 191. https://doi.org/10.1016/j.energy.2019.116439.

Cheng, C. L., Sanchez-Jimenez, C. S., & Lee, M. C. (2009). Research of BIPV optimal tilted angle, use of latitude concept for south orientated plans. Renewable Energy, 34(6), 1644–1650. https://doi.org/10.1016/j.renene.2008.10.025.

Chong, W. T., Gwani, M., Tan, C. J., Muzammil, W. K., Poh, S. C., & Wong, K. H. (2017). Design and testing of a novel building integrated cross axis wind turbine. Applied Sciences (Switzerland), 7(3), 1-21. https://doi.org/10.3390/app7030251.

Fossa, M., Ménézo, C., & Leonardi, E. (2008). Experimental natural convection on vertical surfaces for Building Integrated Photovoltaic (BIPV) applications. Experimental Thermal and Fluid Science, 32(4), 980–990. https://doi.org/10.1016/j.expthermflusci.2007.11.004.

Friling, N., Jiménez, M. J., Bloem, H., & Madsen, H. (2009). Modelling the heat dynamics of building integrated and ventilated photovoltaic modules. Energy and Buildings, 41(10), 1051–1057. https://doi.org/10.1016/j.enbuild.2009.05.018.

Hussein, H. M. S., Ahmad, G. E., & El-Ghetany, H. H. (2004). Performance evaluation of photovoltaic modules at different tilt angles and orientations. Energy Conversion and Management, 45(15–16), 2441–2452. https://doi.org/10.1016/j.enconman.2003.11.013.

Kaiser, A. S., Zamora, B., Mazón, R., García, J. R., & Vera, F. (2014). Experimental study of cooling BIPV modules by forced convection in the air channel. Applied Energy, 135, 88–97. https://doi.org/10.1016/j.apenergy.2014.08.079.

Lee, J., Park, J., Jung, H. J., & Park, J. (2017). Renewable energy potential by the application of a building integrated photovoltaic and wind turbine system in global urban areas. Energies, 10(12), 1-20. https://doi.org/10.3390/en10122158.

Mehleri, E. D., Zervas, P. L., Sarimveis, H., Palyvos, J. A., & Markatos, N. C. (2010). Determination of the optimal tilt angle and orientation for solar photovoltaic arrays. Renewable Energy, 35(11), 2468–2475. https://doi.org/10.1016/j.renene.2010.03.006.

Park, J., Jung, H. J., Lee, S. W., & Park, J. (2015). A new building-integrated wind turbine system utilizing the building. Energies, 8(10), 11846–11870. https://doi.org/10.3390/en81011846.

Selmi, T., Bouzguenda, M., Gastli, A., & Masmoudi, A. (2012). MATLAB/Simulink based modelling of solar photovoltaic cell. International Journal of Renewable Energy Research, 2(2), 213-218.

Sharpe, T., & Proven, G. (2010). Crossflex: Concept and early development of a true building integrated wind turbine. Energy and Buildings, 42(12), 2365–2375. https://doi.org/10.1016/j.enbuild.2010.07.032.

Susan, S. (2017). Integrated configuration of folding wall-BIPV at office building in Surabaya as low carbon building design. Humaniora, 8(1), 31-44. https://doi.org/10.21512/humaniora.v8i1.3694.

Susan, S., Antaryama, I. G. N., & Noerwasito, T. (2015). Integrated configuration of folding roof-BIPV and its optimation at office building in Surabaya. Journal of Architecture & Environment, 14(1), 95- 108. doi: http://dx.doi.org/10.12962/j2355262x.v14i1.a889.

Szokolay, S. (2008). Introduction to Architectural sciences: The basis of sustainable design. Oxford: Architectural Press.

Tabakovic, M., Fechner, H., van Sark, W., Louwen, A., Georghiou, G., Makrides, G., Loucaidou, E., Ioannidou, M., Weiss, I., Arancon, S., & Betz, S. (2017). Status and outlook for Building Integrated Photovoltaics (BIPV) in relation to educational needs in the BIPV sector. Energy Procedia, 111, 993–999. https://doi.org/10.1016/j.egypro.2017.03.262.

Urbanetz, J., Zomer, C. D., & Rüther, R. (2011). Compromises between form and function in grid-connected, Building-Integrated Photovoltaics (BIPV) at low-latitude sites. Building and Environment, 46(10), 2107–2113. https://doi.org/10.1016/j.buildenv.2011.04.024.

Downloads

Published

2020-06-25

Issue

Section

Articles
Abstract 766  .
PDF downloaded 438  .