Comparison Formwork Wood Sloof to Batako Viewed from the Aspect of Time and Cost

Authors

  • Michael Tedja Bina Nusantara University
  • Hendra Halim Bina Nusantara University
  • Kezia Divaninta Bina Nusantara University
  • Valentina Hidayat Bina Nusantara University

DOI:

https://doi.org/10.21512/comtech.v6i4.2174

Keywords:

sloof, concrete-mold, wooden plywood, brick, cost, time

Abstract

Concrete-Mold is one of the most important elements of a building’s structural system. Like other structural systems, the concrete mold placed right after the main wiring structure placed. The function of the concrete mold is to specify the size of the concrete structure itself. The needs of an efficient construction time
and cost are some reasons of the decent and fast development of home-design structure. Sloof’s concrete-mold for two-floor houses can be done with two different materials, i.e. wooden plywood material and bricks. The difference usage of these two materials is the background of this research. The purpose of research is to find out the best way in time and cost efficiency of these two materials. This research carried out using the method of library studies, survey, and comparative study. The result of this research showed that the cost of the brick making the job of sloof concrete mold cheaper and faster. Thus, sloof concrete mold making is one of the project solutions that are more efficient in terms of time and cost.

Dimensions

Plum Analytics

References

Clarasinta, E. (2012). Analisa Biaya dan Waktu Bekisting Metode Semi Sistem (Besi Hollow) dengan Konvensional pada Proyek Puncak Kertajaya Apartemen. Surabaya: Institut Teknologi Sepuluh Nopember.

Frick, H., Moediartianto. (2004). Ilmu Konstruksi Bangunan Kayu: Pengantar Konstruksi Kayu. Yogyakarta: Kanisius.

Kementrian Pekerjaan Umum. (1982). Persyaratan umum bahan bangunan di Indonesia. Jakarta.

Kurniawan, W. (1998). Studi Evaluasi Penggunakan Cetakan (bekisting) pada Proyek Puri Matahari

Surabaya. Malang.

Mallisa, H. (2011).Studi Kelayakan Kualitas Batako Hasil Produksi Industri Kecil di Kota Palu.

Wigbout, I. (1992). Buku Pedoman tentang Bekisting. Jakarta: Erlangga.

Wijaya, I.B.A., Djakfar L., & Budio S.P. (2012). Studi Perbandingan Biaya Bekisting Semi Modern dengan Bekisting Konvensional pada Bangunan Gedung. Jurnal Rekayasa Sipil, 6(3).

Downloads

Published

2015-12-01

Issue

Section

Articles
Abstract 487  .
PDF downloaded 832  .