Penerapan Metode Dmaic dalam Peningkatan Acceptance Rate untuk Ukuran Panjang Produk Bushing

Authors

  • Ferdian Hartoyo Bina Nusantara University
  • Yudha Yudhistira Bina Nusantara University
  • Andry Chandra Bina Nusantara University
  • Ho Hwi Chie Bina Nusantara University

DOI:

https://doi.org/10.21512/comtech.v4i1.2761

Keywords:

length accuracy, bushing, turret machine, DMAIC, Design of Experiment

Abstract

PT Argatama Multy Agung is one provider of metal cutting services using turret machine. The quality of metal cutting services offered are still questioned. The quality service intended is that the length accuracy of the outcome product meets the requirements of the requested length. The purpose of this study is to determine what factors lead to defects the goods length, as well as to provide the right solution that factors can be eliminated so that the number of defective products can be reduced. In this research authors implement Six Sigma methodology with an improved model of Define-Measure-Analyze-Improve-Control (DMAIC) to perform improvement in the services quality provided by PT Argatama Multy Agung. On the improvement phase Design Of Experiment (DOE) is used to find the machine configuration that can produce the best quality. From the research conducted, a significant increase of sigma is obtained.

 

References

Desai, T. N., & Shrivastava, D. R. (2008). Six sigma - sebuah arah baru kualitas dan produktivitas manajemen. Prosiding Kongres Dunia tentang Teknik dan Ilmu Komputer, 2.

Donald, L., Suzanne, B., & Elaine, C. (2003). How to scope DMAIC projects. Quality Progress, 36 (1), 37 – 41.

Dreachslin, J. L. (2007). Applying Six Sigma and DMAIC to diversity Initiatives. Journal of Health care Management, 361 - 367.

Evans, J. R., & Lindsay, W. M. (2007). An Introduction to Six Sigma & Process Improvement. Jakarta: Salemba Empat.

Gaspersz, V. (2002). Pedoman Implementasi Program Six Sigma Terintegrasi Dengan ISO 9001: 2000, MBNQA, dan HACCP. Bogor: Gramedia Pustaka Utama.

Gasperz, V. (2005). Total Quality Management. Jakarta: Gramedia Pustaka Umum.

Mehrjerdi, Y. Z. (2011). Six Sigma: Methodology, tools and its future. Assembly Automation, 31 (1), 79 - 88.

Skripsi tidak diterbitkan. Fakultas Teknik, Universitas Brawijaya, Malang.

Wijaya, L. T., & Kusuma, N. (2008). Penerapan Metode Six Sigma untuk Meningkatkan Kualitas Hasil Produksi Kapsul Lunak Yodiol.

Downloads

Published

2013-06-30

Issue

Section

Articles